How to reset the electric lifting table

If the lifting table is displayed but cannot rise or fall normally, it indicates that it needs to be reset. When E07 is displayed on the control handle, press the "▼" down button. If RST does not appear or no response continues, try to unplug the power cable. After the light on the control handle is turned off, wait 5 minutes before reinserting the power cable.

If the controller handle continues to display RST after plugging in, press and hold the "▼" down key to reset the controller. When the control handle displays 62.0/60 metric height, it indicates that the reset is successful and can be used normally.

Second, electric lifting table common problems and solutions

1, double motor electric lifting table  lifting speed is inconsistent or asynchronous phenomenon

This could be a current problem or a misalignment when mounting. If it is a current problem, press the reset button to restore to the initial state; If they are not aligned during installation, lower the lifting table and reset it. Remove the lifting table legs again for correct installation.

2, the electric lifting table can not rise and fall normally within half a year

Check whether the internal structure of the table leg is corroded due to excessive humidity in the place. If the moisture is really serious, it is necessary to open the lifting table leg to check whether the lifting is smooth and whether there is rust. Try to keep it in a dry environment when you use it.

3, electric lifting table steel frame rust

This problem should be solved by contacting the merchant directly. The steel frame of the regular electric lifting table is mostly made of stainless steel, which generally does not rust. If it is still rusted in a dry environment, it is possible to buy unqualified products, and it is recommended to negotiate compensation or replacement with the merchant.